Dear visitor,
VoIPLine Telecom uses latest technologies in web development. Unfortunately your web browser is not supported and some parts of our we site may not be displayed correctly. Below are links to the latest versions of Google Chrome, Mozilla Firefox and MS Edge browser.

VoIPLine Telecom Support

How to Enable STUN on a Yealink SIP-T46S

We use STUN to overcome NAT issues that can occur in some network environments, particularly sites with many phones.

When enabling STUN on devices in a network, it is important to ensure your Network Gateway / Router has the SIP ALG setting disabled. Please search our Knowledge base, or contact your Router manufacturer for instructions specific to your particular router model.

Enabling STUN on a Yealink SIP-T46S

  1. Find the Handset's Local IPv4 Address by pressing the "OK" key on the phone while on the home screen (lift and replace the handset to return to the home screen)

  2. Open the aforementioned IP Address in a web browser, on a computer connected to the same network as the phone. The address should look like;

    • http://192.168.x.x/
    • http://10.x.x.x/
  3. Login to the phone using the default username and password of 'admin'

  4. On the Account section of the Yealink Interface, change NAT to STUN and click Confirm

  5. On the Network -> NAT section of the Yealink interface, configure the STUN settings and click Confirm.
    After clicking confirm, your phone will reset and STUN is enabled.
    Active: Enabled
    STUN Server:
    STUN Port: 3478

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Quick search will help you find answers to most questions.
If you are unable to find a solution please feel free to submit a support request here